Ericsson EDACS IPE SERIES Manual do Utilizador descarregar pdf (Página 51)

APPENDIX 1

FAULT TRACING

No Power to the Radio

• If the radio does not come on when you hold down

the

key, recharge or replace the battery. Refer

to paragraph

Batteries and Recharging

SERV Indicator Does Not Come On

You have lost contact with the EDACS system and

you cannot place any calls. The reason for this is either:

• The received signal is too weak. See the next

section,

Received Signal is Weak

• You are in an area which is not covered by the

EDACS system selected.

Received Signal is Weak

If the radio displays

CC SCAN

often, move the radio

to obtain a stronger signal.

• Large obstacles such as buildings, hills and moun-

tains can drastically affect the signal strength and

you may have to move to obtain a sufficiently

strong signal.

• Indoors, it is usually best to use the radio near a

window.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56

Sem comentários

Ericsson EDACS IPE SERIES Manual do Utilizador Página 51