Ericsson RX1290 Guia do Utilizador descarregar pdf (Página 42)

Operating the Equipment Locally

Page 3-6 Reference Guide: RX1290 H.264 Contribution Receiver

ST.RE.E10228.1

3.4.3 Entering a Menu Value

Some items shown in the right display area of the front panel LCD display have a

user-entered value. An example of this is the IP Address (Menu 7.1.3) in which the unit’s

Network address has to be entered. Use the following steps as a general guide to entering a

value.

Table 3.4: Entering a Menu Value

Step Action Result

1 Select the menu and display the required

selection.

2 Press Edit on the front panel. The Save button will come on to show that the new value can be

stored.

3 Use the Right or Left pushbutton to move

the cursor to the required digit.

Each pushbutton has a built-in LED that turns on if the pushbutton

function is appropriate to the displayed information.

4 Change the value by using the arrow

pushbuttons.

5 Press Save to store the option.

3.5 Setting Up Preset Services (Menu 1)

3.5.1 Using Preset Services

This group allows up to 40 Services to be stored as presets. Selecting a Service from the

preset list in Menu 1 automatically reconfigures the Contribution Receiver to receive that

Service with its associated parameters set as stored.

3.5.2 Setting Up a Preset Service

Follow the steps in Table 3.5 to store the current Service as a preset.

Table 3.5: Setting Up a Preset Service

Step Action Result

1 Use the menus to set up the unit so that the

required Service is current.

(Refer to Section 0).

This selects the Service and associated parameters for the preset

process.

2 Go to Menu 1 to view the Preset menu.

This displays the menu which allows the Current Service to be

stored at a chosen location (01 – 40). If there is no Current

Service, the menu display reads NO STORED SERVICE.

3 Select a location to store the preset.

The Edit mode cannot be entered unless a

valid Service being decoded.

Use Edit and the arrow pushbuttons to step through the stored

items. This allows a specific location to be chosen. Any vacant

locations are marked by NO STORED SERVICE.

4 Press Save. This stores the current Service and its associated parameters as

a preset in the selected location. This adds the Service to the list

displayed on page 1.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 135 136

Comentários a estes Manuais

Sem comentários

Ericsson RX1290 Guia do Utilizador Página 42

Comentários a estes Manuais

Manuais e produtos relacionados com Recetor Ericsson RX1290