Ericsson LBI-39224 Manual do Utilizador Página 1

LBI-39224ericssonzOperations GuideEDACS®CEC/IMCMANAGERVersion 5.0 for Windows NT®

LBI-39224xList of FiguresFigure 1 CEC/IMC Manager Main Window and Menu Bar... 3-2Figure 2 CEC/IMC Manager Login ...

LBI-392243-70In earlier CEC/IMC firmware/software releases, slotallocations could only be made contiguously starting withchannel one (1). In some sys

LBI-392243-71Site Channel Configuration dialog boxSaveChoose the Save button to perform an immediate save of the currentlyselected PIM channel configu

LBI-392243-72Site Channel Configuration List dialog boxSendChoose the Send button to send the site channel configuration data tothe respective interfa

LBI-392243-73Like the CEC/IMC Audio Board, each T1/E1 Interface Cardwithin a CEC/IMC interface module must have a unique boardaddress setting. This a

LBI-392243-74T1/E1 Digital Site ConfigurationNetworked Systems ConsiderationsAny system nodes that are connected using T1/E1 Interfaces mustremain fre

LBI-392243-754. Slave to external 2.048 MHz (E1 mode only) - RedundantClock Circuits generated by the Clock Board synchronized to1 (or 2 with redunda

LBI-392243-76HelpChoose the Help button to access the Help function. (Help is alsoavailable by pressing the F1 key.)Analog or Digital VoiceIn addition

LBI-392243-77– Digital voice/data using subrate ports mode (currently notsupported)– Digital voice/data using T1/E1 mode (currently notsupported)Lin

LBI-392243-78slightly, and the changes become more pronounced the further thesignal travels down the line. The outgoing original signal is modifiedba

LBI-392243-79Set DefaultsChoose the Set Defaults button to select the pre-programmed defaultvalues from the CEC/IMC Manager hard disk. These values w

LBI-39224xiFigure 28 C3 Maestro Hardware Configuration Dialog Box ... 3-121Figure 29 Console Privilege List Dialog Box ...

LBI-392243-80(async) ports, up to 5, are assigned first and then synchronous (sync)ports are assigned.Save And Send PIM T1/E1 ConfigurationsAny T1/E1

LBI-392243-81action is taken by the system) and when the MOM Controller Boardreceives this new data it will send an acknowledgment message back tothe

LBI-392243-82Site Channel Configuration List dialog boxSendChoose the Send button to send the T1/E1 site channel configurationdata to the respective i

LBI-392243-83two VMIM/CIA sets thus providing up to a total of sixty-fourconventional channel interfaces per CEC/IMC. A VMIM is formed bya Controller

LBI-392243-84VMIM, this represents an operating link between a CIA rack and theVMIM Controller Board.HelpChoose the Help command button to access the

LBI-392243-85AddChoose the Add button to move a selected VMIM from theConfigurable Sites list box and "add" it to the Configured/Active Site

LBI-392243-86VMIM Audio Board Channel ConfigurationAll channel parameters are configured from theSite Channel Configuration dialog box. Only those VM

LBI-392243-87CEC/IMC to DiskChoose the CEC/IMC to Disk button to write the current CEC/IMCconfiguration data to the CEC/IMC Manager hard disk. This a

LBI-392243-88Output Signal Level (dBm)This setting establishes the signal level in dBm (600-ohm impedance;0 dBm = 1 milliwatt) sent out by the selecte

LBI-392243-89ALCDO NOT enable ALC for any channel if the respective AudioBoard part number is 19D903302P1 (any revision).Automatic Level Control (ALC)

LBI-39224xiiFigure 58 NETCLOCK/2 Configuration... 6-2Figure 59 NETCLOCK/2 T-CMD Interconnections...

LBI-392243-90choosing Save As… a small dialog box (see Figure 17 on page 3-34)will appear which allows selection of a new VMIM number. Select thedesi

LBI-392243-91"**" (unconfigured and unsaved) VMIMs appearing in theConfigured/Active Sites list box will be removed and returned to theConfi

LBI-392243-92Configurable Sites:The Configurable Sites list box displays all unconfigured site-typeinterface modules. If a CTIM appears in this box,

LBI-392243-93files from the CEC/IMC Manager's hard disk drive. Therefore, if thedeleted CTIM is subsequently added back to the Configured/Active

LBI-392243-94HelpChoose the Help button to access the Help function. (Help is alsoavailable by pressing the F1 key.)View Current CEC/IMC Manager Chann

LBI-392243-95restore the CEC/IMC Manager configuration database for the selectedinterface module.Channel SelectionSelect a channel (1 thru 32) for con

LBI-392243-96Channel SignalingThis drop-down list box specifies the type of channel signaling sent outby the selected channel for control of external

LBI-392243-97In earlier CEC/IMC firmware/software releases, slotallocations could only be made contiguously starting withchannel one (1). In some sys

LBI-392243-98the selected channel by entering "YES" in the ALC text box or disableit by entering "NO."Save and Send CTIM Configura

LBI-392243-99CloseChoose the Close button to exit the Site Channel Configurationdialog box and return to the Site Channel Configuration List dialogbox

LBI-39224xiiiINTRODUCTIONWelcomeEricsson welcomes you to the world of mobile communications. Webelieve there is no equal to Ericsson products and hav

LBI-392243-1003.9 CONFIRMED CALLIf confirmed call is enabled for the group/unit at the System Manager, aunit that performs a confirmed call will not b

LBI-392243-101Figure 23 System Options Dialog BoxHelpChoose the Help button to access the Help function. (Help is alsoavailable by pressing the F1 ke

LBI-392243-102will continue to fail (10 second delay on every call) until the failed siteis restored (normal Confirm Call operation).DVIM Confirmed Ca

LBI-392243-103Read DiskChoose the Read Disk button to view the current configuration storedat the CEC/IMC Manager hard disk.Read CEC/IMCChoose the Rea

LBI-392243-104Caller IDThis feature allows Caller ID on inbound interconnect calls. This isdone by assigning a "LID" to each telephone line

LBI-392243-105Figure 24 Console Configuration Menu3.11.1 CIM Channel ConfigurationThe CEC/IMC is connected to the EDACS C3 Maestro, C3 Maestro forWi

LBI-392243-106Figure 25 Console Channel Configuration List Dialog BoxEach Console Channel Configuration List dialog box displays theconfigurable con

LBI-392243-107consoles from this list will also be listed in the "Save As…" dialogbox that is accessed from the Console Channel Configuratio

LBI-392243-108CIM Audio Board Channel ConfigurationAll channel parameters are configured from theConsole Channel Configuration dialog box, Figure 26.

LBI-392243-109at the CEC/IMC for the currently selected console interface module.Information within this box updates only after Send is performed from

LBI-39224xivConventionsThose users already familiar with Windows® will feel quite at homewith the graphical aspects of CEC/IMC Manager for Windows NT.

LBI-392243-110LBI-38938 contains a line level adjustment overview section whichcontains general information and general recommendations for bothinput

LBI-392243-111configuration prior to sending it to the CEC/IMC because a send willsend the last configuration that was saved to disk; saving first ens

LBI-392243-112Console Channel Configuration List dialog boxSendChoose the Send button to send the console channel configuration datato the respective

LBI-392243-113Figure 27 Console User Profile Configuration Dialog BoxHelpChoose the Help button to access the Help function. (Help is alsoavailable b

LBI-392243-11416382 range and must not conflict with other unit ID numbers in theSystem Manager's LID database. Number 16383 is the default foru

LBI-392243-115(Console) Setup NumberThis drop-down list box displays which console user setup is currentlybeing displayed on-screen. Select from this

LBI-392243-116for definitions of the three (3) possible levels of IndividualCall functionality each C3 Maestro console may have.Visual IndicatorsTrunk

LBI-392243-117console originated calls. This field is used only for C3Modular/Desktop consoles.Caller Label DelayTime delay, in seconds, that the CAL

LBI-392243-118Default Module VolumeThis is the default volume setting on the unselect speaker (selectedabove) for incoming calls. Use the drop-down l

LBI-392243-119Emergency Clear Silences AlarmSelect this check box to enable the EMERGENCY tone to be silencedwhen the EMERGENCY is cleared by anyone.

LBI-39224xv– appears, scroll bars are provided if there are more choicesthan can fit in the box.– Check boxes present non-exclusive options, you ca

LBI-392243-120performed from the Console User Profile Configuration dialog box.It is important to save the new configuration to the CEC/IMC Managerhar

LBI-392243-121procedure must be performed before the console will operate with thenew configuration.CloseChoose the Close button to exit theConsole Us

LBI-392243-122and its software version will be displayed in the upper right corner ofthe dialog box.Total Number of SpeakersSelect the number of speak

LBI-392243-123replaced with the current configuration. If the CEC/IMC Manager isrunning remotely or as a part of the EDACS Network Manager, thisconfi

LBI-392243-124is used to define the units, groups, and conventional channels that theconsole is allowed to program.Currently dedicated SAID entries ar

LBI-392243-125Figure 29 Console Privilege List Dialog BoxHelpChoose the Help button to access the Help function. (Help is alsoavailable by pressing t

LBI-392243-126Select AllChoose the Select All button to enable all units to be programmed.All the asterisks on the right should be displayed. This al

LBI-392243-127without saving (No), or cancel the Close command and remain in thedialog box (Cancel).3.11.5 C3 Modular/Desktop Console ConfigurationA

LBI-392243-128box, the selected module and its parameters will be displayed in the textboxes above this list box. Change any or all of the parameters

LBI-392243-129Module PresentThe Module Present indicates whether the module actually exists. EachC3 Modular/Desktop console can support up to 64 modu

LBI-39224xviThis page intentionally blank

LBI-392243-130configuration information in NOVRAM and will not require anotherdownload unless the configuration changes.CloseChoose the Close button t

LBI-392243-131Figure 31 Patch and Simulselect View Dialog BoxHelpChoose the Help button to access the Help function. (Help is alsoavailable by pressi

LBI-392243-132CallerThe Unit ID of the console currently utilizing this patch/simulselect.Site MaskThe sites currently involved in this patch/simulsel

LBI-392243-133allow the CEC/IMC and associated consoles to process clear voice aswell as Aegis™ digital and Aegis encrypted calls. DVIM channels aree

LBI-392243-134Figure 32 DVIM Channel Configuration List Dialog BoxEach DVIM Channel Configuration List dialog box displays theconfigurable DVIMs and

LBI-392243-135Configured/Active Sites Prefix Definitions, on page 3-25 for anexplanation of the different prefixes if necessary.AddChoose the Add butt

LBI-392243-136be changed at the CEC/IMC. Input and output signal levels are set to 0dBm, ALC is always disabled, and channel signaling is always off.

LBI-392243-137this box updates only after Send is performed from theDVIM Channel Configuration List dialog box.Channel SelectionSelect a channel (1 th

LBI-392243-138Dynamic ChannelsIn this mode of operation, the DVIM processes Aegis calls that are notassigned to dedicated channels. The DVIM assigns

LBI-392243-139DVIM Channel Configuration List dialog box is required to save andsend DVIM configurations.DVIM Channel Configuration dialog boxSaveChoo

LBI-392241-11. CHAPTER 1GETTING STARTED1.1 ABOUT CEC/IMC MANAGER V5.0Starting with release (version) 5.0 the CEC/IMC Manager is a 32 bitWindows NT ap

LBI-392243-140Controller Board; the Audio configuration is sent directly out fromthere to the respective interface module Controller Board. A "S

LBI-392243-1413.13 DISTRIBUTED MULTISITE / STARGATECONFIGURATIONA common or central network switch known as a "StarGate Controller"has thre

LBI-392243-142Figure 34 StarGate / Remote CEC / NIM Configuration DialogBoxHelpChoose the Help button to access the Help function. (Help is alsoavail

LBI-392243-143This option should only be disabled (unselected) in specialcircumstances in which routing all calls would cause excessive NIMtraffic. I

LBI-392243-144CloseChoose the Close button to exit this dialog box and return to theCEC/IMC Manager main window. If any changes have been made andnot

LBI-392243-1453.14 CONVENTIONAL CHANNELCONFIGURATIONThe VMIM interface module and CIA secondary interface rack coupleconventional tone or DC controlle

LBI-392243-146channel at one CEC/IMC), or eight (8) CEC/IMCs in a StarGatenetwork may each contain up to a maximum of thirty-two (32)conventional cha

LBI-392243-147match the switch assignment number set by the DIP switches on theMOM Controller Board. See CEC/IMC Digital Audio SwitchInstallation, Se

LBI-392243-148CEC/IMC SWITCHASSIGNMENT NUMBERSCONVENTIONAL CHANNELALLOCATIONS36, 44, 52, 6097 – 12837, 45, 53, 61129 – 16038, 46, 54, 62161 – 19239, 4

LBI-392243-149Figure 35 Conventional Channel ConfigurationDialog BoxA CEC/IMC Manager can only program/configure its (local)conventional channels. W

LBI-392241-2and viewing interface module status data. The various screens andterms the user may encounter are walked through and explained in fulldet

LBI-392243-150It is recommended that a conventional channel LID stored in theCEC/IMC Manager be given the same alias as the correspondingconventional

LBI-392243-151CEC/IMCSWITCHASSIGNMENTNUMBERCIA RACKNUMBERCIA RACKCHANNELNUMBERNETWORKCONV.CHANNELNUMBER36 2 1 22536 2 31 255** Channel 256 is not avai

LBI-392243-152Local/Remote Conventional Channel DispatchAfter a console has received the System Manger conventional channeldatabase information and it

LBI-392243-153– reduced audio delay for a console PTT– consoles may pre-empt Causeway patches and Causewaysimulselects– patch/simulselect update ti

LBI-392243-154– A console-originated conventional channel call is routed onlyto the conventional channel. This is because the consolesknow nothing a

LBI-392243-1553.14.3 Conventional Channel ConfigurationAfter all conventional channels have been configured, saved,and sent, a CEC/IMC Manager-based

LBI-392243-156Conventional Channel Configuration dialog box. Unless otherwisestated, all information applies to both local and remote conventionalcha

LBI-392243-157Conventional Channel Configuration dialog box displays the firstlocal conventional channel high-level configuration. The displayedconfi

LBI-392243-158At the System Manager, all conventional channel LIDs mustbe programmed with a "Unit Type" equal to "Other."Channel A

LBI-392243-159numbers representative of bold-face numbers in the tables aredisplayed for a given max. conventional channels per CEC/IMC.)Switch Number

LBI-392241-3and EDACS Data Gateway (EDG) interface. In release 5.0CEC/IMC Manager TDM bus time slots are allocated fromeach site, console, or DVIM in

LBI-392243-160Line TypeSelect 2-wire (simplex) or 4-wire (duplex) line interfacing byselecting the respective option button within this group. Select

LBI-392243-161The VOX threshold and 2175 Hz hold tone level settings arenow also stored at the CEC/IMC Manager's hard disk. This isa change from

LBI-392243-162Remote ControlSelect this option if the currently selected conventionalchannel is connected through a Conventional ConcentratorCard and

LBI-392243-163Tone (E&M PTT)Standard tone signaling on all but PTT (station transmit)commands, E&M M-lead signaling on PTT commands.Standard t

LBI-392243-164The maximum number of conventional channels configurablefor Causeway operation may be limited by EDACS licenseprivileges. See FEATURE D

LBI-392243-165reprograms the CCI and VMIM Controller Boards. If after makingchanges, a save is performed but a send is not, the actual CEC/IMCconvent

LBI-392243-166CloseChoose the Close button to exit theConventional Channel Configuration dialog box and return to theCEC/IMC Manager main window. Any

LBI-392243-167COMMAND DEFINITIONSET RX FREQ 7Set receive frequency to frequency 7.SET RX FREQ 8Set receive frequency to frequency 8.REPEAT ENABLEEnabl

LBI-392243-168Figure 36 Tone Controlled Station State Table Mapping DialogBoxHelpChoose the Help button to access the Help function. (Help is alsoava

LBI-392243-1692175 Hz Hold Tone LevelThe 2175 Hz hold tone level should be set in accordance with the levelrequired at the conventional base station a

LBI-392241-4Console Configuration– Console Hardware Configuration – Perform special consolehardware configurations for C3 Maestro™ consoles.– Consol

LBI-392243-170CloseChoose the Close button to exit theTone Controlled Station State Table Mapping dialog box and returnto the Conventional Channel Con

LBI-392243-171Figure 37 DC Controlled Station State Mapping Dialog BoxHelpChoose the Help button to access the Help function. (Help is alsoavailable

LBI-392243-172State TableThe State Table list box contains all of the possible programmablecommands for a base station. Select the required commands

LBI-392243-173CG ENABLE -6 -6 0 0 – +6 +11CG DISABLE -11 -11 -2.5 -2.5 – +6 +11The columns beneath the DC Control Current heading represent thenext st

LBI-392243-174(No), or cancel the Close command (Cancel) and remain in theDC Controlled Station State Table Mapping dialog box.3.15 LOGGING RECORDER

LBI-392243-175displayed in this list box. Above this list box is a read-only field whichidentifies the database source.Read CEC/IMCChoose the Read CE

LBI-392243-176The Selected Module text box displays the module number selected inthe Logging Recorder Configuration dialog box, this is read-onlyinfo

LBI-392243-177– choosing the Program LRIM button (changed data must besaved to disk prior to programming).A "No" indicates the module is NOT

LBI-392243-178Send ModChoose the Send Mod button to send the selected moduleconfigurations (more than one module may be selected) to theCEC/IMC MOM.

LBI-392243-1793.17 CENTRALIZED ACTIVITY LOGGER (CAL)CONFIGURATIONThe Centralized Activity Logger (CAL) computer uses the call activityinformation pro

LBI-392241-51.3 DATA LOGGING FEATUREOne of the most important features of the CEC/IMC Manager(MOM PC) is its ability to log data. All data that is p

LBI-392243-180Configure System / System Options / Auxiliary I/O to display theAuxiliary I/O Event Configuration dialog box.Figure 40 Auxiliary I/O Ev

LBI-392243-181error/warning triggered outputs are assigned to consoles by use of aconsole mask.Type (Device) and Assign (Device)Each event is assigned

LBI-392243-182for details on the wiring of the I/O ports/bits. Select the event type(Input or Output) from the Event Type drop-down list box.Input Ev

LBI-392243-183Output EventIf Output is selected several other fields are affected and requireconfiguration as described in the following paragraphs.–

LBI-392243-184Maestro uses Alt+F1 - Alt+F8 (press and hold the Alt key and thenpress the F1 - F8 key). The C3 Modular console uses the ALARM 1 -4 and

LBI-392243-185Warning TriggerA warning trigger will set the output event active on receipt of awarning with the specified group/sub-group at the MOM.

LBI-392243-186prevent overburdening the CEC/IMC Manager's warning system withauxiliary I/O state change warnings.An output event state change wil

LBI-392243-187data is not successfully broadcast to all required devices a "MOMCommunication Error" or "Device not active" notify

LBI-392243-188Activate TDM Bus Slots function. From the CEC/IMC Managermenu bar select Configure System / CEC/IMC Configuration /Activate TDM Bus Slo

LBI-392243-189Figure 42 Unit/Group Location and Unit Logout Dialog BoxHelpChoose the Help button to access the Help function. (Help is alsoavailable

LBI-392241-6This page intentionally blank

LBI-392243-190The following terms are used to describe unit logout functions.– Activity: A PTT or Radio Login.– PTT: Push-To-Talk, keying a radio.

LBI-392243-191System Options dialog box (Configure System /System Options / Multisite Settings). This does notreset unit timers or change unit timer

LBI-392243-192– Unit Timers set to No Timeout never log off. This is usedfor units that show very little activity.– Unit Timers decrement each minu

LBI-392243-193listed in 15-minute increments from 15 minutes to 24 hours, includingNo Timeout.Manual EntryFor timer based unit logout manual entries a

LBI-392243-1943.20.2 Command Unit LogoutThe command logout function allows the operator to logoff a specifiedunit instantly, without waiting for the

LBI-392243-195search parameters for location requests, and the display of "Last KnownLocation" will be limited by this filter.Manual EntryTh

LBI-392243-196narrower search parameters. Choose the Send Location Requestbutton to execute the specified search. The Unit Locations will bedisplaye

LBI-392243-197Choose the Apply Grp/Site Filter button to initiate the specifiedsearch parameters. Choose the Send Location Request button toexecute t

LBI-392243-198Read DiskChoose the Read Disk button to view the current configuration storedat the CEC/IMC Manager hard disk.Read CEC/IMCChoose the Rea

LBI-392243-199devices to disable secondary drops. If the Multisite ChannelMonitoring function is disabled, secondary drops will not be put on theGSC

LBI-392242-12. CHAPTER 2INSTALLATION2.1 UNPACKINGAfter opening this package, verify you have received the following:– CEC/IMC Manager Version 5.0 for

LBI-392243-200the Backplane. The MOM Controller Board controls clock selection bysending clock select command signals to all other Controller Boardsw

LBI-392243-201Clock Boards can be installed. Generally, two Clock Boards areinstalled per CEC/IMC to allow uninterrupted operation when oneClock Boar

LBI-392243-202basis from the CEC/IMC Manager. The Local CEC/IMC ID isdisplayed at the top center of the dialog box. Unselect the check box todisable

LBI-392243-2032. If only one Clock Board is installed, turn both clocks ("A" and"B") ON using the panel-mounted toggle switches.

LBI-392243-204matrix includes one special site—the "priority system." The prioritysystem is given an extra bit error rate threshold toleran

LBI-392243-205Repeat the sequence for all necessary sites. A more detailed descriptionof the fields and configuration process follows.The CEC/IMC ID

LBI-392243-206Read DiskChoose the Read Disk button to read the currently selected site'sProSound configuration from the CEC/IMC Manager's ha

LBI-392243-207configuration is saved at the CEC/IMC Manager server, typically localto the CEC/IMC; it is not saved at a remote client.SaveChoose the S

LBI-392243-208This page intentionally blank

LBI-392244-14. CHAPTER 4MONITOR SYSTEM4.1 SYSTEM MONITORINGThe CEC/IMC Manager for Windows NT system monitoringcapabilities allow the CEC/IMC Manager

LBI-392242-22.3 DISKETTE HANDLINGWhile working with your diskettes you should consider the followinghandling procedures:– Always store diskettes in t

LBI-392244-24.2.1 Node MatrixThe Node Matrix screen contains a 16 x 16 matrix of all possiblehexadecimal GSC node addresses in the system.Figure 45 C

LBI-392244-3Show Site NumberSelect this check box to display the site assignment number of the site-type interface modules as shown above. If this ch

LBI-392244-44.2.2 Board IdentificationSelecting (single-click) any of the nodes will display theBoard Identification dialog box shown below. The info

LBI-392244-5Node IDThis field displays the current hexadecimal GSC address.TypeThis field displays the interface module type: MIM, MOM, etc.Assignment

LBI-392244-64.3 FEATURE DATAThis function displays the Licensed Features and Licensed Capabilitiesfor your particular CEC/IMC. Select Feature Data fr

LBI-392244-74.3.1 Licensed FeaturesFailsoft PatchThis license allows the customer to perform console dispatch patchoperations when the system is in Tr

LBI-392244-8Table 11 Licensed MSC TypeLicense Value MSC Type Description0 IMC Default value if license is not present,multiple site interface1 CEC Di

LBI-392244-9Max Net ChanThis license specifies the number of CEC/IMC TDM Bus slots that arerequired for NIM devices. Each NIM channel (StarGate or Re

LBI-392244-10Figure 47 Active Devices Dialog Box4.4.2 Diagnostic OptionsSelect the report option to view from the Selection field of theDiagnostics d

LBI-392244-11DisplayChoose the Display button to display the selected report in theDiagnostics dialog box. This information can be sent to a file or

LBI-392242-3It is important to use the DISKCOPY command when makinga backup and not the COPY or XCOPY commands. Thediskette contains a volume label t

LBI-392244-12location of the error's source. In the case of a global systemerror, the text "GLOBAL SYSTEM" will be displayed acrossthe

LBI-392244-13View WarningsFigure 49 Diagnostics Dialog Box, Warnings Option SelectedEach entry in the report consists of two lines of information det

LBI-392244-14The short description following the message code reflects thisformat. For example: W02-033 "Out of Range-AudioChannel."– All

LBI-392244-15Figure 50 Diagnostics Dialog Box, Call Translation OptionSelectedInformation displayed by this on-line option is identical to theinforma

LBI-392244-16GSC DataThis option is also accessible from the Diagnostics Options menu. Itallows the user to view the CEC/IMC Manager datalog informat

LBI-392244-17GSC TranslationThis option, also accessible from the Diagnostics Options menu, issimilar to the GSC Data option except there is an attemp

LBI-392244-18To create a GSC Translation report select the GSC Translation optionbutton and enter date and time ranges in the appropriate text box, th

LBI-392244-19Figure 54 HDLC (Channel B) Statistics Dialog BoxPress the F1 key to access the Help function.Clear DataChoose the Clear Data button to r

LBI-392244-20the System Errors field and is also counted as a single error in eachindividual interface module error count.StatusIndicates whether the

LBI-392244-21VFR = 0 (invalid frame received)CRC = 0 (CRC check failed)RAB = 1 (received frame was aborted from transmitting station)U_FRMR Tx/RxA cou

LBI-392242-41. VERIFY that the MIGRATE.BAT utility has been executed tosave the original (DOS) CEC/IMC Manager configuration.2. Insert the "Insta

LBI-392244-22Figure 55 GSC Node Statistics Dialog BoxPress the F1 key to access the Help function.Clear DataChoose the Clear Data button to reset the

LBI-392244-23individual interface module will be greater that the value displayed inthe System Errors field. This will occur whenever a global system

LBI-392244-244.5.3 NIM StatisticsThe NIM STATISTICS dialog box displays various NIM data. Thedata is updated continuously (about once per second) whi

LBI-392244-25ErrorsDisplays the number of errors currently existing that affect the selectedinterface module. This count will include errors that aff

LBI-392244-26Link StateIndicates the current control link state (UP or DOWN) between theselected NIM and any networks NIMs. If the link state is DOWN

LBI-392244-27Device TypeThis field displays the interface module type: MIM, NIM, etc.(currently only MIMs, NIMs, and PIMs can be equipped with T1/E1In

LBI-392244-28StatisticsCard NumberThis field indicates which (active) cards within the interfacemodule the subsequent data fields reference. Each int

LBI-392244-29reset. A Framing Error occurs on the T1/E1 Interface Card inresponse to several different types of data framing errors.Rem AlarmsThis fi

LBI-392244-30This page intentionally blank

LBI-392245-15. CHAPTER 5OFF-LINE DIAGNOSTICS5.1 OFF-LINE DIAGNOSTIC FUNCTIONSThe CEC/IMC Manager (MOM PC) has two off-line MS-DOS®utilities to extrac

LBI-392242-57. The TDM Bus/Slots must be read from the CEC/IMC in theConsole Audio Configuration screens.a) Select Menu Option Configure System / CEC

LBI-392245-2Calls - extract channel assignment/drop data from data log bufferSyntax: calls [<options>]Options:/bhh:mm:ss start time of data extr

LBI-392245-3AVGTT System All Call VG, Tx trunkedAVGMTU System All Call VG Update, msg trunkedAVGTTU System All Call VG Update, Tx trunkedCTI Indiv Int

LBI-392245-4A sample output of the CALLS function using the following commandline will look like:calls /d09-12-91 /b14:00:00 /e15:00:00 /sMSG MSG SUB

LBI-392245-5/dmm-dd-yy date of data log file/s soft copy output requested/n suppress node active messages/h display help file then exitThe output from

LBI-392245-6gscmon /d12-30-92 /b09:10:00 /e09:11:00 /n TIME DATA 09:10:01.44 66 01 02 17 01 01 0E

LBI-392246-16. CHAPTER 6NETCLOCK/2™ INTERFACE OPTION6.1 OVERVIEWA Coordinated Universal Time (UTC) standard option is available thatallows the CEC/IMC

LBI-392246-2Figure 58 NETCLOCK/2 ConfigurationUsing the RS-232 serial connection, the CEC/IMC Manager reads the26-character ASCII time/date data from

LBI-392246-34. Connect the NETCLOCK/2 to an unused CEC/IMC ManagerCOM port. See the cable wiring diagrams that follow.The NETCLOCK/2 has two RS-232 s

LBI-392246-4OUTINGND235RXDTXDGND(DB-9 MALE) (DB-9 FEMALE)235MANAGERCEC/IMCTONETCLOCK/2TOSERIAL COMMCOMM PORTPORT9-Pin CEC/IMC Manager COM PortOUTINGND

LBI-392246-5TDATAGND59RXD TXDGND(DB-9 MALE) (DB-9 FEMALE)235MANAGERCEC/IMCTONETCLOCK/2TOREMOTE OUTPUTCOMM PORTPORT(N.C.)9-Pin CEC/IMC Manager COM Port

LBI-392242-6c) Choose the Modify button.d) For each PIM choose the CEC/IMC to Disk button.e) Verify the Slots match in the Upper and Lower list boxe

LBI-392246-6– Time Zone Switches– Baud Rate Switches– Antenna Installation6.3 INSTALLATION VERIFICATIONBefore connecting the NETCLOCK/2 to the CEC/I

LBI-39224A-17. APPENDIXES7.1 APPENDIX A - LOGGED ERROR DEFINITIONSLOGGEDERRORMESSAGELOGGEDERRORDATACAUSE/CORRECTIVEACTIONE00-xxx:UNKNOWN ERRORAn erro

LBI-39224A-2LOGGEDERRORMESSAGELOGGEDERRORDATACAUSE/CORRECTIVEACTIONE01-020:HW FAIL - CLOCKBANKLower byte is theclock which failed:00h = A clock, 01h =

LBI-39224A-3LOGGEDERRORMESSAGELOGGEDERRORDATACAUSE/CORRECTIVEACTIONE02-022:BUS FAIL - GSC BUSLower byte containsthe bus number thatfailed, either 0 or

LBI-39224A-4LOGGEDERRORMESSAGELOGGEDERRORDATACAUSE/CORRECTIVEACTIONE03-028:LINK FAIL -CONSOLE0000h = CIM controldata link failure.0001h = Attachedcons

LBI-39224A-5LOGGEDERRORMESSAGELOGGEDERRORDATACAUSE/CORRECTIVEACTIONE05-021:INCOMPATIBLE -AUDIO BUSE05-023:INCOMPATIBLE -CEC/IMC MANAGERE06-116:INVALID

LBI-39224A-6LOGGEDERRORMESSAGELOGGEDERRORDATACAUSE/CORRECTIVEACTIONE08-18:DEVICE CONFLICT -CONTROL BOARDNo information in thedata word.A Controller Bo

LBI-39224A-7LOGGEDERRORMESSAGELOGGEDERRORDATACAUSE/CORRECTIVEACTIONE11-143:ENCRYPTION FAIL -LICENSE DATA BADNone This invalid feature data systemerror

LBI-39224A-8LOGGEDERRORMESSAGELOGGEDERRORDATACAUSE/CORRECTIVEACTIONE11-146:ENCRYPTION FAIL -LICENSE EXPIREDAbbreviated name oflicense that hasexpired:

LBI-39224B-17.2 APPENDIX B - LOGGED WARNINGDEFINITIONSLOGGEDWARNINGMESSAGELOGGEDWARNINGDATACAUSE/CORRECTIVEACTIONW00-xxx:UNKNOWNWARNING(none) A warni

LBI-392242-714. Any T1/E1 node databases must be defined or converted fromanalog to T1 or E1. See the T1/E1 Installation Instructions formore details

LBI-39224B-2LOGGEDWARNINGMESSAGELOGGEDWARNINGDATACAUSE/CORRECTIVEACTIONW02-050:OUT OF RANGE -AUDIO SUM COUNTValue of sum countwhen the attempt wasmade

LBI-39224B-3LOGGEDWARNINGMESSAGELOGGEDWARNINGDATACAUSE/CORRECTIVEACTIONW03-066:UNSUPPORTED ID -PATCH/SIMULSELECTMessage ID value thatgenerated thewarn

LBI-39224B-4LOGGEDWARNINGMESSAGELOGGEDWARNINGDATACAUSE/CORRECTIVEACTIONW06-033:MISMATCH - AUDIOCHANNELLogical ID (LID) ofthe unit thatexperienced them

LBI-39224B-5LOGGEDWARNINGMESSAGELOGGEDWARNINGDATACAUSE/CORRECTIVEACTIONW07-120:OVERFLOW - MOMERROR ARRAY(none) A new error message has beenreceived, b

LBI-39224B-6LOGGEDWARNINGMESSAGELOGGEDWARNINGDATACAUSE/CORRECTIVEACTION"Queued" Call was queued at secondarysite(s)."Sys Busy" Cal

LBI-39224B-7LOGGEDWARNINGMESSAGELOGGEDWARNINGDATACAUSE/CORRECTIVEACTION"CIC Denied"warning and the callerand callee of thefailed confirmed c

LBI-39224B-8LOGGEDWARNINGMESSAGELOGGEDWARNINGDATACAUSE/CORRECTIVEACTIONW10-114:TIMEOUT - SAFETYTIMERChannel number thatwas cleared.The NIM (StarGate s

LBI-39224B-9LOGGEDWARNINGMESSAGELOGGEDWARNINGDATACAUSE/CORRECTIVEACTIONW15-144:UNAVAILABLE -FAILSOFT PATCHData field containsLogical ID (in hex) ofthe

LBI-39224B-10LOGGEDWARNINGMESSAGELOGGEDWARNINGDATACAUSE/CORRECTIVEACTIONNotes for W18-xxx warnings: Controller Boards with firmware versions prior to

LBI-39224B-11LOGGEDWARNINGMESSAGELOGGEDWARNINGDATACAUSE/CORRECTIVEACTIONW20-136:CONV CHAN -CONFLICTChannel number inconflict.A conventional channel de

LBI-39224iiiPERSONAL COMPUTER PROGRAMMINGSOFTWARE LICENSE AGREEMENTTHE SOFTWARE PROGRAM PROVIDED WITH THIS DOCUMENT ISFURNISHED UNDER A LICENSE AND MA

LBI-392242-8This page intentionally blank

LBI-39224B-12LOGGEDWARNINGMESSAGELOGGEDWARNINGDATACAUSE/CORRECTIVEACTIONW24-147:LICENSED FEATURE- EXPIRESAbbreviated name oflicense that hasexpired:

LBI-39224C-17.3 APPENDIX C - SNMP AGENT and PROXY forCEC/IMC (Optional)The CEC/IMC Manager SNMP AGENT is a DLL (Dynamic LinkLibrary) that is installe

LBI-39224C-2– Move down the directory tree (left-hand side of the screen) tothe SOFTWARE entry. Click on the SOFTWARE entry sothat it is highlighted

LBI-39224D-17.4 APPENDIX D - FONT SELECTABLE DIALOGBOXESConsole Channel Configuration dialog box– Text in scroll boxesDVIM Channel Configuration dia

LBI-39224D-2This page intentionally blank

LBI-39224E-17.5 APPENDIX E - POPUP MESSAGE BOXDEFINITIONSThe CEC/IMC Manager server (GUI_SERVER.exe) is not available.This may be only a momentary co

LBI-39224E-2One or more required files could not be located when attempting toexecute the client program. In the example shown above the DLL file&quo

LBI-39224E-3In systems with a System Manager running V5.0 software, the Unit ID(LID) and Console Alias fields may be edited. The Unit ID valuesentere

LBI-39224E-4The Delete button has been chosen in one of the Console Configurationdialog boxes, this pop-up box is prompting confirmation of the decisi

LBI-39224E-5A Send of an unconfigured and inactive (** prefix) interface modulewas attempted from the Site Channel Configuration List dialog box.Site

LBI-392243-13. CHAPTER 3OPERATION AND CONFIGURATIONThe primary intent of this chapter is to describe CEC/IMC Managerprogram operation, and valid CEC/I

LBI-39224E-6When the CEC/IMC MOM Controller Board ⇔ CEC/IMC Managercommunication link is established, the CEC/IMC Manager comparesthe disk stored Slo

LBI-39224E-7The information saved was successfully saved to the CEC/IMCManager hard disk.The T1/E1 database was successfully downloaded (sent) from th

LBI-39224E-8This page intentionally blank

LBI-39224G-1Glossary of TermsAegisAegis is Ericsson's digital voice audio system that employs advancedDigital Signal Processing (DSP) circuitry.

LBI-39224G-2Call Director patchThe Call Director patch feature allows the dispatcher at a console to"patch" a telephone line to a specific u

LBI-39224G-3CECConsole Electronics Controller – The CEC is an advanced radiocommunications controller incorporating time division multiplexdigital aud

LBI-39224G-4control dataControl data includes any data used for system control.Controller BoardThe Controller Board processes control data, holds data

LBI-39224G-5EDACSEnhanced Digital Access Communication System – The term"EDACS radio system" refers to RF equipment that may beinterfaced to

LBI-39224G-6GETCEricsson General Electric Trunking Card – The GETC is amicroprocessor-controlled shelf that can be configured to performmany different

LBI-39224G-7Jessica PBX GatewayJessica Private Branch eXchange Gateway – This advancedtelephone interconnect system is used with CEC/IMC equipment top

LBI-392243-2Figure 1 CEC/IMC Manager Main Window and Menu BarSelecting any of the choices from the CEC/IMC Manager menu bar(Configure System, Monito

LBI-39224G-8NIMNetwork Interface Module – Two or more IMC networks can belinked together for distributed multisite communications using a NIMat each I

LBI-39224G-9ProSoundWhen roaming on a wide area (multisite) network, ProSound enablesa radio to select a new site based upon the bit-error-rate of the

LBI-39224G-10siteThis term normally refers to radio equipment at a single specificlocation. (Also see site assignment number.)site assignment numberIn

LBI-39224G-11VMIMConVentional MASTR II/III Interface Module – The VMIM couplesthe CIA secondary interface rack to the primary CEC/IMC interfacemodules

LBI-39224G-12This page intentionally blank

LBI-39224I-1IndexAaccess levelchange 3-8create 3-5default 3-3System Administrator 3-3adjacencyProSound 3-204, 3-207ALC 3-30, 3-32, 3-136assignment num

LBI-39224I-2Conventional Interface (CI)3-145, 3-155, 3-168, 3-171board identification 4-3, 4-5busGSC 3-198TDM 3-19, 3-31, 3-39, 5-2activate slots 3-18

LBI-39224I-3save and send high-levelconfiguration 3-164StarGate Network 3-145StarGate Network channelallocation 3-146StarGate Network channelprogrammi

LBI-39224I-4module configuration 3-175save and send moduleconfiguration 3-177MMIMaudio board configuration 3-28audio interface type selection3-26MIM s

LBI-39224I-5TDM bus 3-19, 3-40, 3-187activate 3-187allocatingconsole interfacemodule 3-110DVIM 3-137general 3-19site-type interfacemodule 3-31TDM time

LBI-392243-3OKChoose the OK button to save any new settings, activate those settings,and exit the current dialog box.Exit ProgramChoose the Exit Progr

LBI-39224I-6log in under new 3-8VVMIMaudio board configuration 3-86save and send audio boardconfiguration 3-89VMIM selection 3-83WW_GUI.exe 1-1, 2-3WI

LBI-392243-4Certain menu selections may be "grayed-out," indicating thatthose menu selections (functions) are not available to thataccess le

LBI-392243-5Figure 4 CEC/IMC Manager Configuration User Menu3.2.1 Set Up AccountsThis option is used to add a new user account. Adding a new userac

LBI-392243-6Figure 5 Add/Modify/Delete Users Dialog BoxHelpChoose the Help button to access the Help function. (Help is alsoavailable by pressing the

LBI-392243-7User PasswordSelect (no password required) or unselect (password required) the NoPassword check box as required for the new user. If sele

LBI-392243-8CancelChoose the Cancel button to immediately exit the current dialog boxwithout saving or activating any new settings.Login As New UserSe

LBI-392243-9another platform when the user logs in; in such instances a user mayneed to have accounts at each platform under different user names with

LBI-39224iv8. In no event, whether on warranty, contract or negligence, shall COMPANY beliable for special, incidental, indirect or consequential dama

LBI-392243-103.4 INITIAL CEC/IMC MANAGER AND MOMCONTROLLER BOARD CONFIGURATIONThe CEC/IMC Manager Configuration dialog box, shown in Figure7, is the

LBI-392243-11COM 1, COM 2, COM 3 or COM 4, as required using the respectiveoption button in the dialog box.The selected serial port interrupt request

LBI-392243-12GSCMOM.EXE off-line programs as described in Chapter 5, OFF-LINE DIAGNOSTIC FUNCTIONS.If data logging is desired, select the Enable Datal

LBI-392243-13Figure 8 System Options MenuFigure 9 Configure System Clock Synchronization Dialog BoxHelpChoose the Help button to access the Help fun

LBI-392243-14Output CEC/IMC Manager Time to CEC/IMCSelect (enable) this check box to cause the CEC/IMC Manager time toupdate the CEC/IMC time. The de

LBI-392243-15Manager user is able to select unit, group, and site data from the SystemManager; or unit, group, and site data, along with conventional

LBI-392243-16Figure 10 System Mgr/Network Mgr Entity Database Dialog BoxHelpChoose the Help button to access the Help function. (Help is alsoavailabl

LBI-392243-17down list box: whether it was full or partial, status, and number ofrecords in the database file that were updated.EntityThe Entity box a

LBI-392243-183.6.2 Transfer From CEC/IMC ManagerIf a "Transfer From CEC/IMC Manager" is desired, all upload data willoriginate from the CEC

LBI-392243-19CloseChoose the Close button to exit theSystem Mgr/Network Mgr Entity Database dialog box, if no otherdatabase transfers are desired, and

LBI-39224vThis manual is published by Ericsson Inc. without any warranty. Improvements andchanges to this manual necessitated by typographical errors

LBI-392243-20TDM bus allocations are performed from the TDM Bus Configurationdialog box, shown in Figure 11. From the CEC/IMC Manager menubar select

LBI-392243-21will greatly increase the number of slots available, and decreasing thenumber of buses will greatly decrease the number of slots availabl

LBI-392243-22In most cases, the term "site" in this program does not refer toan EDACS trunked site or any other type of radio system. Itref

LBI-392243-23Figure 12 CEC/IMC Configuration Menu3.8.1 MIM Channel ConfigurationInterfacing between the CEC/IMC and an EDACS trunked site isaccompli

LBI-392243-24Figure 13 Site Channel Configuration List Dialog Box(MIM Shown)Each Site Channel Configuration List dialog box displays theconfigurable

LBI-392243-25All selected MIMs in this list will also be included in the "Save As…"dialog box that is accessed from the Site Channel Configu

LBI-392243-26Interface Board will activate the T1/E1 Digital Site Configurationdialog box. These options are discussed in detail in subsequentsection

LBI-392243-27Figure 14 Audio Interface Type Dialog Box(Audio Board selected)T1/E1 Interface optionIf T1/E1 Interface Card was selected (Figure 15), a

LBI-392243-28T1/E1 Digital Site Configuration dialog box will appear. Continuewith channel configuration as described in "T1/E1 Interface CardEq

LBI-392243-29Figure 16 Site Audio Channel Configuration Dialog Box(MIM Shown)HelpChoose the Help button to access the Help function. (Help is alsoava

LBI-39224viThis page intentionally blank

LBI-392243-30by comparing the CEC/IMC Manager and CEC/IMC list boxes in theSite Channel Configuration dialog box. Ensure that the CEC/IMCconfiguratio

LBI-392243-31Channel SignalingThis drop-down list box specifies the type of channel signaling sent outby the selected channel for control of external

LBI-392243-32For example, if the currently selected site-type interface module is a20-channel MIM with five (5) Audio Boards addressed 1 thru 5,Bus/Sl

LBI-392243-33the selected channel by entering "YES" in the ALC text box or disableit by entering "NO."Save and Send MIM Audio Boar

LBI-392243-34Figure 17 "Save As…" Dialog BoxFor example, if "Site 8" is the currently selected site-type interfacemodule and &quo

LBI-392243-35MOM Controller Board receives this new data it will send anacknowledgment message back to the CEC/IMC Manager, which willthen display the

LBI-392243-36T1/E1 selection is performed at the CEC/IMC Manager on aCEC/IMC wide basis. Changing the Line Type will cause thecomplete T1/E1 database

LBI-392243-371. Master - Redundant Clock Circuits generated by the ClockBoard in a FREE RUN mode. This allows any CEC/IMC tobecome the master source

LBI-392243-381. One node in the system must be the MASTER source ofnetwork timing. The CEC/IMC will support a primary andredundant (or alternate) MA

LBI-392243-39Figure 18 T1/E1 Digital Site Configuration Dialog Box(T1 Line Type Selected)HelpChoose the Help button to access the Help function. (Hel

LBI-39224viiContentsINTRODUCTION... xiii1. CHAPTER 1 GETTING STARTED...

LBI-392243-40one full duplex 4-wire 600-ohm audio channel provided by theAudio Board. The T1/E1 Interface Card extracts a signal fromone bus slot and

LBI-392243-41E1), Robbed Bit for T1, and CAS-CC for E1. Select the signaling typefrom the drop-down list box.Line LengthThis is the distance between

LBI-392243-42should be the same as the configuration stored on the CEC/IMCManager hard disk. If the CEC/IMC Manager hard disk data wascleared or rese

LBI-392243-43T1/E1 Channel AssignmentT1/E1 logical channels are assigned starting with channel 1, these arethe channels used to transmit voice, data,

LBI-392243-44← DS0 →subchannel 1 subchannel 2 subchannel 3 subchannel 4 subchannel 512345678Table 3 Synchronous Subrate Port

LBI-392243-45"Send to Site Successful" message will be received to confirm that thedata was received by the interface module Controller Boar

LBI-392243-46will appear to warn of the unsaved changes and the user will be giventhe opportunity to save and exit (Save) or exit without saving thech

LBI-392243-47Each NIM is assigned a unique site assignment number (1 thru 32)within the CEC/IMC. This number corresponds to and matches the siteassig

LBI-392243-48LBI-38938, CEC/IMC Digital Audio Switch Installation, Set-up, andTroubleshooting.NIM "Site" SelectionPrior to actual channel co

LBI-392243-49Configured/Active Sites:The Configured/Active Sites list box displays NIMs which have beenadded but not yet channel-configured, NIMs whic

LBI-39224viii3.11 CONSOLE CONFIGURATION ... 3-1043.11.1 CIM Channel Configuration ... 3-10

LBI-392243-50selecting T1/E1 Interface will activate theT1/E1 Digital Site Configuration dialog box. These options arediscussed in detail in subseque

LBI-392243-51View Current CEC/IMC Manager Channel ConfigurationThe upper list box in the Site Channel Configuration dialog box,labeled "CEC/IMC M

LBI-392243-52If Automatic Level Control (ALC) is disabled for the selectedchannel, subtract 1.5 dBm from the required Input SignalLevel setting. For

LBI-392243-53Save and Send NIM Audio Board ConfigurationsWhen channel configuration of the selected NIM is complete, theSite Channel Configuration dia

LBI-392243-54selecting it via the selection list box, changing the configuration asrequired, and then choosing Save.CloseChoose the Close button to ex

LBI-392243-55T1/E1 Equipped NIM ConfigurationThis section describes configuration for channels of T1/E1 InterfaceCard-equipped NIMs. Channel configur

LBI-392243-56depending upon board configuration, can provide modem-less datalinks over spare T1/E1 channels to either internal or external devices.Som

LBI-392243-573. Slave to external 1.544 MHz - Redundant Clock Circuitsgenerated by the Clock Board synchronized to 1 (or 2 withredundancy) external c

LBI-392243-58HelpChoose the Help button to access the Help function. (Help is alsoavailable by pressing the F1 key.)Analog or Digital VoiceIn addition

LBI-392243-59– Digital voice/data using subrate ports mode (currently notsupported)– Digital voice/data using T1/E1 mode (currently notsupported)Lin

LBI-39224ix4.2 NODE DATA ... 4-14.2.1 Node Matrix...

LBI-392243-60slightly, and the changes become more pronounced the further thesignal travels down the line. The outgoing original signal is modifiedba

LBI-392243-61Set DefaultsChoose the Set Defaults button to select the pre-programmed defaultvalues from the CEC/IMC Manager hard disk. These values w

LBI-392243-62Asynchronous (async) ports, up to 5, are assigned first and thensynchronous (sync) ports are assigned.Save And Send NIM T1/E1 Configurati

LBI-392243-63action is taken by the system) and when the MOM Controller Boardreceives this new data it will send an acknowledgment message back tothe

LBI-392243-64Site Channel Configuration List dialog boxSendChoose the Send button to send the T1/E1 site channel configurationdata to the respective i

LBI-392243-65PIM "Site" SelectionPrior to actual channel configuration, the interface module to beconfigured must be selected. From the CEC

LBI-392243-66available PIMs may be selected at one time for modification in theSite Channel Configuration dialog box. All selected PIMs in this listw

LBI-392243-67Configured/Active Sites list box will be removed and returned to theConfigurable Sites list box.Audio Board-Equipped PIM ConfigurationThi

LBI-392243-68View Current CEC/IMC Channel ConfigurationThe lower list box in the Site Channel Configuration dialog box,labeled "CEC/IMC," di

LBI-392243-69If Automatic Level Control (ALC) is disabled for the selectedchannel, subtract 1.5 dBm from the required Input SignalLevel setting. For