Ericsson RX8000 Series Especificações descarregar pdf (Página 14)

Global Satellite Coverage

RX8200 Configuration Guide

Within the MPE section, make sure the following information is included:

 PID: – From the drop down tab, the PID 3550 – USER should be available once the receiver is tuned into

RLS. If not then a 0 – USER PID will be displayed which can also be selected.

 Filter MAC: - Enter the MAC address as shown in Figure 13 above for your client region.

 User PID: - 3550

 MPE Enable: - Select this box.

 Also ensure that the MPE Enable tick box is enabled for IP Out Link 2 and then click Apply Changes to

store this configuration.

3.7 CHANGING THE IP OUTPUT IP ADDRESS

The configuration page for changing the IP Output Interface is located under the Output tab.

As this network Interface directly connects to the WNE Server the IP address convention used globally is

172.16.2.2.

Select the Tx Enable tab so that this interface is active. A Green tick mark should be displayed in the box.

Figure 15. IP Output Interface 2 – Default Settings Shown

Once the IP address has been changed, ensure to select Apply Changes to store this new IP address.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 25 26

Sem comentários

Ericsson RX8000 Series Especificações Página 14