Ericsson LBI-39001 Manual do Utilizador descarregar pdf (Página 72)

LBI-39040 COMMANDS AND SYNTAX

6.6. STATISTICS AND DIAGNOSTICS COMMANDS

The following commands provide statistical and diagnostics services associated with Jessica and its operation within an

EDACS infrastructure.

6.6.1. scsi

scsi

-- queries SCSI bus for active devices

USAGE:

scsi -n

DESCRIPTION:

scsi queries the SCSI bus for an active device, where -n is the SCSI bus address ID of the target device. Device

information, such as the vendor, model number, and storage capacity are displayed on the terminal. n = 0 implies that all

seven (1-7) SCSI addresses should be queried for devices.

OPTIONS:

None.

NOTES:

For removable storage devices (i.e., floppy disk or tape), no information will be available unless the media (i.e., diskette)

is installed in the target device.

EXAMPLES:

The following example queries all seven SCSI IDs for active devices.

pSH+> scsi

SCSI ID: 1 No information available.

SCSI ID: 2 LUN: 0 Removable: NO System volume: 1.2

Blocks: 166243 Block Size: 512 bytes

Vendor: CONNER Model: CP30080E-85Mb

Type: Direct access (disk)

SCSI ID: 3 No information available.

SCSI ID: 4 No information available.

SCSI ID: 5 No information available.

SCSI ID: 6 No information available.

SCSI ID: 7 No information available.

The following example queries a specific SCSI ID for an active device -- in this case, the PI system hard disk.

pSH+> scsi -2

SCSI ID: 2 LUN: 0 Removable: NO System volume: 1.2

Blocks: 166243 Block Size: 512 bytes

Vendor: CONNER Model: CP30080E-85Mb

Type: Direct access (disk)

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 95 96

Sem comentários

Ericsson LBI-39001 Manual do Utilizador Página 72