Ericsson LBI-39001 Manual do Utilizador descarregar pdf (Página 43)

LBI-39039

5. DIRECT INBOUND RADIO CALLS IN A PBX NETWORK

This example shows how to retain direct inbound EDACS dialing and provide direct outbound dialing. No access code is

needed to select EDACS for inbound Private Network calls, and no access code is needed by the radios to reach the Private

Network. This is possible since the customer did not require that the MD110 extension have the same ease of function. They

may direct dial an EDACS radio, but must use an “8” to call extensions on the other PBX. It is possible to provide direct

dialing to the MD110 extensions from EDACS or the other PBX extensions since the MD110 and other PBX number series

do not overlap.

Direct inbound dialing and Direct outbound dialing are possible when MD110 extensions are not used or their operating

characteristics are not important.

Requirements

• Customer will only have test extensions on the MD110 and will use the "8" access code to call from the MD110

extension to the other PBX.

• Customer wants direct outbound radio dialing to the other PBX extensions that are 4-digit numbers in the range 1000-

4999. Dialing an "8" before the extension number is not acceptable.

• Customer wants “9+” dialing routed to the other PBX which it will route to the Public Network.

• Customer wants “8+” dialing routed to the other PBX which it will route to the Private Network.

• MD110 extensions are in 5000-5999 range.

Implementation

The basic script file is used with the following changes:

• The "8" LCR code is initialized.

• The "8" LCR code routes calls to the other PBX.

• All outbound radio calls are prefixed with "8" by the MD110.

• MD110 extensions and EDACS routes are enabled with NACDS to dial "8+" numbers.

• The script file is changed to move extensions from the 4000-4099 range to the 5000-5999 range.

A step-by-step process is not presented; the information is provided for someone with basic MD110 programming skills.

This entry creates the automatic "8" prefix for all outbound radio calls.

RONDI

ROU

1 EDACS Route

PRE

Prefix

8 Inserted in front of digits sent from EDACS to the MD110

This command causes outbound radio calls to 9911 to be passed to the other PBX as 9911.

LCDDI

TAB

Table

ENT External Number Table

ENTRY

Number

89911 9+911

TRC

Truncate

1 One digit

PRE

Prefix

680 Private Network External Destination Code

CONF

Conflict Number

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 57 58

Comentários a estes Manuais

Sem comentários

Ericsson LBI-39001 Manual do Utilizador Página 43

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Ericsson LBI-39001