Ericsson LBI-39001 Manual do Utilizador descarregar pdf (Página 9)

LBI-39039

The following script file is meant to be a basis for configuring the MD110. This script file must be customized for your

application. FIOL can send a completed script file to a LIM with a clean software load (no configuration).

After the file is sent and a dump (save) to the MD110's Hard Drive Unit (HDU) is performed, the script file can not be

used to change the configuration. If the dump has not been performed, a power cycle of the MD110 will clear the

configuration from RAM and another updated script file can be sent.

Once the MD110 configuration has been dumped (saved), MD110 commands must be entered to end (erase)

configuration information and initiate (enter) configuration. These commands are order-sensitive and require the use of the

MD110 Operation and Maintenance ACS, MD110 Operation and Maintenance SES, Documents for Applications Systems

"Whatever Country," and Least-Cost Routing manuals.

Configuring the MD110 is not recommended for someone with no PBX configuration experience or MD110 training.

The recommended training includes an MD110 Introduction, Extension Programming, Trunk Programming, and Traffic

Management courses. Ericsson provides condensed manuals to attendees of these training courses.

/*********************************************************************************/

/* Description: JESSICA MD110 Configuration Script File */

/* File Name: JESS_MD.TXT */

/* Version: 0.02 */

/* Date: 10-December-93 */

/*********************************************************************************/

/* NUMBER ANALYSIS */

/*********************************************************************************/

/* Least Cost Routing */

/*********************************************************************************/

NANSI:NUMTYP=LC, NUMSE=9;

/*********************************************************************************/

/* External Destination */

/*********************************************************************************/

NANSI:NUMTYP=ED, NUMSE=0&&3&670&&699;

/*********************************************************************************/

/* DISA */

/*********************************************************************************/

NANSI:NUMTYP=DI, NUMSE=5000;

/*********************************************************************************/

/* Extensions */

/*********************************************************************************/

NANSI:NUMTYP=EX, NUMSE=4000&&4099;

/*********************************************************************************/

/* Common Abbreviated Dialing */

/*********************************************************************************/

NANSI:NUMTYP=AC, NUMSE=4100&&4999;

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 57 58

Sem comentários

Ericsson LBI-39001 Manual do Utilizador Página 9